New Multi Installer (Full Game Install) available updated 7-2-16
Moderator: thunderchero
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
New Multi Installer (Full Game Install) available updated 7-2-16
This file has been replaced by the BOTF All in One 1.0.0 installer
Hi Everyone,
Here is new release of Multi installer
BOTF English German
to install;
you only need to uninstall vanilla version (no need to uninstall mods)
download new version
run installer
on "additional tasks" page of installer select option you want installed allow installer to finish (do not close and command prompts during install)
Note; this will not change or effect any mod installed or installed in the future.
multi installer should not be installed to 2 different locations at the same time. the second install would overwrite first registry settings.
make sure all compatibility setting are unchecked on trek.exe (vanilla or mods) if using DxWnd, but while the DxWnd.exe should be ran as administrator only.
optional changes/improvements to vanilla install only.
remove hades files (setting of stbof.ini to 3D=DIRECT3D still possible)
restored 512 x 512 original textures
retreat/evade crash fix to hobs option during install of vanilla playable version (mod will require manual patching see link for available patches)
1024 x 768 GUI patch (optional) (mod will still require manual patching)
DxWnd files added to install path and shortcuts (optional)
gui errors patches;
Fed redeploy screen error (fix)
Intel Empire screen - dilth/total systems (fix)
Cardassian Intel/Research display (fix)
Star-names display (fix)
Romulan buy button fix (fix)
Cardassian territory-pic bug (fix) By: Joker
files that are no longer needed have been removed
I hope everyone enjoys.
thunderchero
Hi Everyone,
Here is new release of Multi installer
BOTF English German
to install;
you only need to uninstall vanilla version (no need to uninstall mods)
download new version
run installer
on "additional tasks" page of installer select option you want installed allow installer to finish (do not close and command prompts during install)
Note; this will not change or effect any mod installed or installed in the future.
multi installer should not be installed to 2 different locations at the same time. the second install would overwrite first registry settings.
make sure all compatibility setting are unchecked on trek.exe (vanilla or mods) if using DxWnd, but while the DxWnd.exe should be ran as administrator only.
optional changes/improvements to vanilla install only.
remove hades files (setting of stbof.ini to 3D=DIRECT3D still possible)
restored 512 x 512 original textures
retreat/evade crash fix to hobs option during install of vanilla playable version (mod will require manual patching see link for available patches)
1024 x 768 GUI patch (optional) (mod will still require manual patching)
DxWnd files added to install path and shortcuts (optional)
gui errors patches;
Fed redeploy screen error (fix)
Intel Empire screen - dilth/total systems (fix)
Cardassian Intel/Research display (fix)
Star-names display (fix)
Romulan buy button fix (fix)
Cardassian territory-pic bug (fix) By: Joker
files that are no longer needed have been removed
I hope everyone enjoys.
thunderchero
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
reserved for additional info/updates
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
Release candidate post
Hi Everyone,
I have been working on updated version of Multi installer. all tests so far have been very promising.
I feel this is the most stable version in many years with the addition of DxWnd and hob fix! so try the original version again.
file no longer available
I hope this will be last Release candidate
changes to RC5
separated install options
added more gui fixes that were missing in 1024 x 768 changes to RC4
fixed install path edit problem for different locations from default
added gui fixes that were missing in 1024 x 768
to install;
you only need to uninstall vanilla version (no need to uninstall mods)
download new version
run installer
on "additional tasks" page of installer select option you want installed allow installer to finish (do not close and command prompts during install)
Note; this will not change or effect any mod installed or installed in the future.
optional changes/improvements to vanilla install only.
remove hades files (setting of stbof.ini to 3D=DIRECT3D still possible)
restored 512 x 512 original textures
retreat/evade crash fix to hobs option during install of vanilla playable version (mod will require manual patching see link for available patches)
1024 x 768 GUI patch (optional) (mod will still require manual patching)
DxWnd files added to install path and shortcuts (optional)
gui errors patches;
Fed redeploy screen error (fix)
Intel Empire screen - dilth/total systems (fix)
Cardassian Intel/Research display (fix)
Star-names display (fix)
Romulan buy button fix (fix)
Cardassian territory-pic bug (fix) By: Joker
files that are no longer needed have been removed
I hope everyone will take time to provide some feedback and or suggestions.
thunderchero
Hi Everyone,
I have been working on updated version of Multi installer. all tests so far have been very promising.
I feel this is the most stable version in many years with the addition of DxWnd and hob fix! so try the original version again.
file no longer available
I hope this will be last Release candidate
changes to RC5
separated install options
added more gui fixes that were missing in 1024 x 768 changes to RC4
fixed install path edit problem for different locations from default
added gui fixes that were missing in 1024 x 768
to install;
you only need to uninstall vanilla version (no need to uninstall mods)
download new version
run installer
on "additional tasks" page of installer select option you want installed allow installer to finish (do not close and command prompts during install)
Note; this will not change or effect any mod installed or installed in the future.
optional changes/improvements to vanilla install only.
remove hades files (setting of stbof.ini to 3D=DIRECT3D still possible)
restored 512 x 512 original textures
retreat/evade crash fix to hobs option during install of vanilla playable version (mod will require manual patching see link for available patches)
1024 x 768 GUI patch (optional) (mod will still require manual patching)
DxWnd files added to install path and shortcuts (optional)
gui errors patches;
Fed redeploy screen error (fix)
Intel Empire screen - dilth/total systems (fix)
Cardassian Intel/Research display (fix)
Star-names display (fix)
Romulan buy button fix (fix)
Cardassian territory-pic bug (fix) By: Joker
files that are no longer needed have been removed
I hope everyone will take time to provide some feedback and or suggestions.
thunderchero
Re: Multi Installer RC3 available (open testing)
Hi thunder, I wiped my install of BOTF clean to install this, but found that launching DXWnd windowed for vanilla BOTF just does not launch the game at all. No pop-ups, no taskbar notifications...any idea what is wrong? I installed with all options selected (running Windows 10 laptop with switchable graphics).
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
is there a green dot next to birth of the federation in list of DxWnd? if not the install path may need to be edited.
right click on "birth of the federation" and select modify on main tab you can adjust path.
if this is problem what is your install location installer should be adjusting location.
also did you try to start game without dxwnd?
right click on "birth of the federation" and select modify on main tab you can adjust path.
if this is problem what is your install location installer should be adjusting location.
also did you try to start game without dxwnd?
Re: Multi Installer RC3 available (open testing)
Thanks for the quick reply, thunder. I can confirm that there is a green dot next to BOTF in DXWnd, and I've confirmed that it is pointing to the BOTF trek.exe file correctly.
I have also tried launching the game without DXWnd, but it does the same as DXWnd - nothing.
For both scenarios (with and without DXWnd) after attempting to launch BOTF, the mouse pointer turns into the circular loading icon for a while and then stops with nothing else happening.
Previous 1.0.2 works fine with DXWnd.
I have also tried launching the game without DXWnd, but it does the same as DXWnd - nothing.
For both scenarios (with and without DXWnd) after attempting to launch BOTF, the mouse pointer turns into the circular loading icon for a while and then stops with nothing else happening.
Previous 1.0.2 works fine with DXWnd.
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
can you look at botf folder does it look like all the files are there? around 47 files plus english folder (if english install) and dxwnd folders
what OS?
what OS?
Re: Multi Installer RC3 available (open testing)
I'm running Windows 10 Pro, thus the need for DXWnd.
I have 50 files in my BOTF folder (using English install). Please see attached image.
I have 50 files in my BOTF folder (using English install). Please see attached image.
- Attachments
-
- BOTF Folder.png (52.28 KiB) Viewed 9863 times
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
looks like files are all there.
stbof.res 93.1 mb?
does crash log have any info?
DxWnd you use fullscreen or windowed?
could I have a little info on system
desktop, laptop?
screen current resolution?
video card info?
have you tried re-installing?
stbof.res 93.1 mb?
does crash log have any info?
DxWnd you use fullscreen or windowed?
could I have a little info on system
desktop, laptop?
screen current resolution?
video card info?
have you tried re-installing?
- captaindusk
- Commander
- Posts: 300
- Joined: Sat Feb 07, 2009 3:00 am
Re: Multi Installer RC3 available (open testing)
Hi TC and Sea-Bee,
My vanilla installation won't start at all too. No clean install though. I just deleted and tried to reinstall the multi installer (multiple times) as the first post in this thread said that there is no need to uninstall mods. My folder contains 47 files plus GERMAN and DXWnd folders. Mods are all working. Only Vanilla won't start. Paths are correct and there is a green dot besides BotF in dxwnd. Maybe this crash log is helpful?
ST:BOF Thu Jun 2 20:18:08 2016
Version Under Test: 72
File: dounzip.c, Line: 421, C:\botf\STBOF.RES
Initialize State: 0
Player Empire: 1 Starting Seed: 0
Galaxy shape: 0 Galaxy Size: 0
I tried DxWnd Fullscreen and my stbof.res is only 92,7MB not 93,1MB.
Phenom II X6 1090T 3,2 Ghz
ASUS ROG HD7970 Ghz
8GB RAM
Radeon Crimson 16.5.3
Win 10 Pro x64
Current Resolution 1980x1020
My vanilla installation won't start at all too. No clean install though. I just deleted and tried to reinstall the multi installer (multiple times) as the first post in this thread said that there is no need to uninstall mods. My folder contains 47 files plus GERMAN and DXWnd folders. Mods are all working. Only Vanilla won't start. Paths are correct and there is a green dot besides BotF in dxwnd. Maybe this crash log is helpful?
ST:BOF Thu Jun 2 20:18:08 2016
Version Under Test: 72
File: dounzip.c, Line: 421, C:\botf\STBOF.RES
Initialize State: 0
Player Empire: 1 Starting Seed: 0
Galaxy shape: 0 Galaxy Size: 0
I tried DxWnd Fullscreen and my stbof.res is only 92,7MB not 93,1MB.
Phenom II X6 1090T 3,2 Ghz
ASUS ROG HD7970 Ghz
8GB RAM
Radeon Crimson 16.5.3
Win 10 Pro x64
Current Resolution 1980x1020
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
yes it is helpfulcaptaindusk wrote:Maybe this crash log is helpful?
check if stbof.res is protected or read only
- captaindusk
- Commander
- Posts: 300
- Joined: Sat Feb 07, 2009 3:00 am
Re: Multi Installer RC3 available (open testing)
I just checked and it isn't protected.
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
the reason I asked on my windows 7 system it has a lock in icon for stbof.res I have never noticed this before. but game runs for me.
try to run trek.exe as admin?
try to run trek.exe as admin?
- captaindusk
- Commander
- Posts: 300
- Joined: Sat Feb 07, 2009 3:00 am
Re: Multi Installer RC3 available (open testing)
tried but unfortunately it had no effect. game still won't start.
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7953
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: Multi Installer RC3 available (open testing)
unzip and try thie exe
Attachment removed no longer needed
edit; should have explained the change, new installer is using QD no-cd patch, the exe above is default install options 1024 german but with original no-cd change.
Attachment removed no longer needed
edit; should have explained the change, new installer is using QD no-cd patch, the exe above is default install options 1024 german but with original no-cd change.