II think I might have sent you the wrong save. It's in the seventh slot but the folder lists it as save six I just noticed. (Sorry about that!) You should be on turn 162 when you load it. Try this one.thunderchero wrote: ↑Thu Jan 06, 2022 1:30 pmJust tested your saved game went 3-4 turns without crash, did you do something during that turn?
running integrity check give no info to error.
BOTF All in One installer 2.0.0 (Released 7-10-2020)
Moderator: thunderchero
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
- Attachments
-
- game6.sav
- (208.02 KiB) Downloaded 76 times
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7934
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
that save crashes, integrity check did not help but found a few errors.
from windows event log fault address is 0x0000db4a/40e74a in sub REPAIR_TRAIN 40E5D0
I did notice you were playing with random and borg on? if you play with both off game is much more stable. but that is just my opinion.
game does have several monsters in game already.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
Yes, I at first assumed that random and Borg being on didn't have anything to do with it but I've played a few long games since them with random and Borg off and have had no problems at all. The Borg are really fun though, it's too bad they assimilate my games as well as my colonies...thunderchero wrote: ↑Thu Jan 06, 2022 5:18 pmthat save crashes, integrity check did not help but found a few errors.
from windows event log fault address is 0x0000db4a/40e74a in sub REPAIR_TRAIN 40E5D0
I did notice you were playing with random and borg on? if you play with both off game is much more stable. but that is just my opinion.
game does have several monsters in game already.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
I've played a few long games now with randoms and the Borg both on, but autosave off, and there have been no crashes. I think autosave was the culprit.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
Sorry if this is redundant, but does the installer work on an iPad? Looking to play this again, but I don’t have a PC at the moment.
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7934
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
I doubt if that is possible without a lot of windows enumeration
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
Got it, thank youthunderchero wrote: ↑Sat Jan 29, 2022 10:50 pmI doubt if that is possible without a lot of windows enumeration
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
That'd be pretty cool on an iPAd, it'd be like the real star trek Lcars!
Hmm what about the Windows surface tablets I wonder?
Hmm what about the Windows surface tablets I wonder?
- Smoothgrandmama
- Cadet 3rd Year
- Posts: 13
- Joined: Tue Apr 16, 2013 11:45 am
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
Thanks for all the time y'all guys have invested in this. Looking to get this up and running again tomorrow.
- Benman2785
- Lieutenant-Commander
- Posts: 224
- Joined: Fri Mar 20, 2009 2:00 am
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
i HIGHLY suggest there should be an option to choose between DXWind and dgVoodoo2
it is reliable and easy to set up - it fixes all Win7/8/10 bugs - it fixes mouse lag
here: https://github.com/dege-diosg/dgVoodoo2
here: dgVoodoo.conf
it is reliable and easy to set up - it fixes all Win7/8/10 bugs - it fixes mouse lag
here: https://github.com/dege-diosg/dgVoodoo2
here: dgVoodoo.conf
Code: Select all
;==========================================================================
; === Text based config file for dgVoodoo2
; === Use this file if you are a game modder/hacker or an experted user and
; want to modify some advanced properties not available via the CPL.
;==========================================================================
Version = 0x278
;--------------------------------------------------------------------------
[General]
OutputAPI = d3d12_fl12_0
Adapters = all
FullScreenOutput = 1
FullScreenMode = true
ScalingMode = unspecified
ProgressiveScanlineOrder = false
EnumerateRefreshRates = true
Brightness = 100
Color = 100
Contrast = 100
InheritColorProfileInFullScreenMode = true
KeepWindowAspectRatio = false
CaptureMouse = true
CenterAppWindow = false
;--------------------------------------------------------------------------
[GeneralExt]
DesktopResolution =
DesktopBitDepth =
DeframerSize = 0
ImageScaleFactor = 1
CursorScaleFactor = 0
DisplayROI =
Resampling = bicubic
FreeMouse = false
WindowedAttributes =
FullscreenAttributes =
FPSLimit = 144
Environment =
EnableGDIHooking = false
;--------------------------------------------------------------------------
; removed Glide
;--------------------------------------------------------------------------
[DirectX]
DisableAndPassThru = false
VideoCard = internal3D
VRAM = 1024
Filtering = appdriven
KeepFilterIfPointSampled = true
DisableMipmapping = false
Resolution = unforced
Antialiasing = appdriven
AppControlledScreenMode = true
DisableAltEnterToToggleScreenMode = false
BilinearBlitStretch = false
PhongShadingWhenPossible = false
ForceVerticalSync = false
dgVoodooWatermark = false
FastVideoMemoryAccess = false
;--------------------------------------------------------------------------
[DirectXExt]
AdapterIDType =
VendorID =
DeviceID =
SubsystemID =
RevisionID =
DefaultEnumeratedResolutions = all
ExtraEnumeratedResolutions =
EnumeratedResolutionBitdepths = all
DitheringEffect = pure32bit
Dithering = disabled
DitherOrderedMatrixSizeScale = 0
DepthBuffersBitDepth = appdriven
Default3DRenderFormat = argb8888
MaxVSConstRegisters = 256
NPatchTesselationLevel = 0
MSD3DDeviceNames = false
RTTexturesForceScaleAndMSAA = false
SmoothedDepthSampling = true
DeferredScreenModeSwitch = false
PrimarySurfaceBatchedUpdate = false
EnableSpecializedShaders = true
;--------------------------------------------------------------------------
[Debug]
Info = enable
Warning = enable
Error = enable
MaxTraceLevel = 0
;LogToFile = false
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7934
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
because as soon as I downloaded file my AV red flagged files.
- Spocks-cuddly-tribble
- Code Master
- Posts: 1926
- Joined: Sun Apr 27, 2008 2:00 am
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
There is 3 options in the AIO installer:Benman2785 wrote: ↑Fri Apr 29, 2022 5:57 pmi HIGHLY suggest there should be an option to choose between DXWind and dgVoodoo2
- DxWnd (windowed)
- DxWnd (fullscreen)
- no DxWnd (use when using MPR++) -> select this and use any program you like (it doesn't install MPR++)
I don't know how many bugs is too many but that point is reached somewhere before however many in BotF is.
- Benman2785
- Lieutenant-Commander
- Posts: 224
- Joined: Fri Mar 20, 2009 2:00 am
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
for my link? impossible: https://www.virustotal.com/gui/url/47b0 ... ?nocache=1thunderchero wrote: ↑Fri Apr 29, 2022 6:13 pm because as soon as I downloaded file my AV red flagged files.
i use this wrapper since ages - never had problems with it
maybe you set your AV to "paranoid"
yet allways stay safe
- thunderchero
- Site Administrator aka Fleet Admiral
- Posts: 7934
- Joined: Fri Apr 25, 2008 2:00 am
- Location: On a three month training mission, in command of the USS Valiant.
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
you misunderstand me, I would trust file myself, but to add to all in one it would be problematic to say the leastBenman2785 wrote: ↑Sat Apr 30, 2022 2:40 pm i use this wrapper since ages - never had problems with it
maybe you set your AV to "paranoid"
yet allways stay safe
btw the new beta All in one is now using the DxWnd proxy files no gui or command prompts to run game
- Benman2785
- Lieutenant-Commander
- Posts: 224
- Joined: Fri Mar 20, 2009 2:00 am
Re: BOTF All in One installer 2.0.0 (Released 7-10-2020)
i would suggest adding the fix for 1366x768
https://www.mediafire.com/file/j6188pyj ... ix.7z/file // Edit3: updated 06.05.2022 23:10
i redone the whole fix based on the orginal (and working) english 1366x768 = should look same by now
- fixed the wrong size in bars for hd_scrn.tga (german)
- rearanaged hd_bkrcv.tga to work better in english and german
- fixed the too small textbox in Xdiplomat.wdf and Xsolars.wdf ("Freundschaftlich" and "automatisch" not showing correct in german version)
https://www.mediafire.com/file/j6188pyj ... ix.7z/file // Edit3: updated 06.05.2022 23:10
i redone the whole fix based on the orginal (and working) english 1366x768 = should look same by now
- fixed the wrong size in bars for hd_scrn.tga (german)
- rearanaged hd_bkrcv.tga to work better in english and german
- fixed the too small textbox in Xdiplomat.wdf and Xsolars.wdf ("Freundschaftlich" and "automatisch" not showing correct in german version)