Today I played a little bit on the latest Patch. After finishing I checked the AI...apparently it started terraforming now some of the planets.
But something more generic struck me today.
What exactly is eating up ~50% of the CPU-single Thread power of my system when "sitting" around idle on the galaxy map ?!?.
I mean...really >50% of my CPU Power goes for "drawing" the screen or what ?
This load btw disappears as soon as one enters a systems build menu.
Perhaps this "explains" the (albeit already much better) GUI issues ? I mean scrolling with full galaxy view enabled (F12) is really really slow...but even with just my ~30% discovered area its really drastic ?
Can you elaborate on that a little bit - it seems strange that there is such a constant CPU drain all the time when on the galaxy map. I mean I would understand if the CPU requirements would "Jump" when trying to scroll or doing anything...but just sitting there and watching the map raises my CPU temperature constantly by ~15 °C (thats how I found this. The Temp goes from below 50 °C to 65 °C when my Vent kicks in to keep it down).
This made me check the CPU usage stats during this period and its obvious. CPU load is ~10-12% on my Ryzen 6 Core with SMT enabled...which means its more then 50% of a single core/thread utilized permanently all the time, even idling not doing anything.
While in the system Menu CPU load drops to ~5%....and temps fall to 50 °C again.
OK - I`ll try to optimize and readjust my CPU cooling curve a little bit to avoid the upspinning of the cooler, but would be nice if you could give some feedback where this constant CPU drain comes from.
CPU usage
Moderators: thunderchero, Iceman
-
- Lieutenant-Commander
- Posts: 130
- Joined: Sun Aug 04, 2019 5:13 pm
Re: Supremacy new release
For your reference. My problems occur on a Win 10 Ryzen 3600 (6C12T) System with 32 GB RAM.
Turn switching times is ultra fast even now (barely 5s).
Yes all sector borders are "ondulating" (theres a tiny color shift running from top to bottom or so). I think I did not notice this when running in Win 7 summer last year.
But still CPU usage when "nothing" is happening, no clicking etc... ?!? Why ?
Turn switching times is ultra fast even now (barely 5s).
Yes all sector borders are "ondulating" (theres a tiny color shift running from top to bottom or so). I think I did not notice this when running in Win 7 summer last year.
But still CPU usage when "nothing" is happening, no clicking etc... ?!? Why ?
-
- Admiral
- Posts: 3318
- Joined: Fri Apr 10, 2009 2:00 am
Re: Supremacy new release
For full context, I ran this test on a Win7 desktop with 8GB RAM.
Re CPU, I get similar numbers and behavior. Like mentioned previously, I get no GUI issues with Win7 - so there might not be a correlation here. Notice I'm only trying to separate the issues, as the GUI is clearly an OS issue, CPU is not.
You mentioned the "ondulation" effect in sector borders (which I had even forgotten was there). Will check that.
The ondulating borders effect is intended, and has always been there. You just forget about it at some point.
Maybe I could tie it to the twinkling stars setting.
Re CPU, I get similar numbers and behavior. Like mentioned previously, I get no GUI issues with Win7 - so there might not be a correlation here. Notice I'm only trying to separate the issues, as the GUI is clearly an OS issue, CPU is not.
You mentioned the "ondulation" effect in sector borders (which I had even forgotten was there). Will check that.
The ondulating borders effect is intended, and has always been there. You just forget about it at some point.
Maybe I could tie it to the twinkling stars setting.
-
- Captain
- Posts: 660
- Joined: Wed Jun 21, 2017 6:07 am
Re: Supremacy new release
I also checked the CPU usage (idle, Galaxy map)
I had about 6-7% at my desktop (Win 10 1909, Intel Core i7 8700 6 cores/12 threads, 32GB) but also about 5% of graphic processor use
At my 10 years old laptop I had about 43% of CPU use (Win 10 1909, Intel Core i5 M430, 2 cores/4 threads, 8GB memory)
I had about 6-7% at my desktop (Win 10 1909, Intel Core i7 8700 6 cores/12 threads, 32GB) but also about 5% of graphic processor use
At my 10 years old laptop I had about 43% of CPU use (Win 10 1909, Intel Core i5 M430, 2 cores/4 threads, 8GB memory)
-
- Captain
- Posts: 660
- Joined: Wed Jun 21, 2017 6:07 am
Re: Supremacy new release
Hi,
I had not too much time for Supremacy recently, but I had a look for CPU usage in Feb02.
My PC was using about 15% CPU power in idle / glaxy map, but after couple of minutes it droped to about 5%. My old latop was using about 38-40%, so slightly less as I remember.
I had not too much time for Supremacy recently, but I had a look for CPU usage in Feb02.
My PC was using about 15% CPU power in idle / glaxy map, but after couple of minutes it droped to about 5%. My old latop was using about 38-40%, so slightly less as I remember.
-
- Admiral
- Posts: 3318
- Joined: Fri Apr 10, 2009 2:00 am
Re: Supremacy new release
So it is better?geordie wrote: ↑Wed Feb 05, 2020 12:49 pm Hi,
I had not too much time for Supremacy recently, but I had a look for CPU usage in Feb02.
My PC was using about 15% CPU power in idle / glaxy map, but after couple of minutes it droped to about 5%. My old latop was using about 38-40%, so slightly less as I remember.
Did you notice any changes in the UI? In the negative sense, I mean.
I decreased the "refresh rate" of the galaxy screen - at least I think that was it, hence my need for feedback.
geordie:
It is slightly better, but as I wrote earlier my games this year are quite OK. I have not noticed any delays or performance problems.
-
- Admiral
- Posts: 3318
- Joined: Fri Apr 10, 2009 2:00 am
Re: Supremacy new release
geordie wrote: ↑Sat Jan 18, 2020 9:35 am I also checked the CPU usage (idle, Galaxy map)
I had about 6-7% at my desktop (Win 10 1909, Intel Core i7 8700 6 cores/12 threads, 32GB) but also about 5% of graphic processor use
At my 10 years old laptop I had about 43% of CPU use (Win 10 1909, Intel Core i5 M430, 2 cores/4 threads, 8GB memory)
Yep, in your system the improvement was smallish.
@Iscaran, when you get back, could you check this too please? Thanks.
-
- Lieutenant-Commander
- Posts: 130
- Joined: Sun Aug 04, 2019 5:13 pm
Re: CPU usage
OK.
CPU Usage got better now...just around 6-7% in "idle" sitting on galaxy map.
GPU usage between 0-80% (for a second).
There is still "some" lagging in game - but got much better.
It seems that the User interface Aliasing setting impacts this a little.
The other two seemd to have no impact. At least on my rig.
I wonder whether it might have to do with Ryzen CPU being built of 2 Core complexes...
System:
CPU: Ryzen 3600X
GPU: Radeon R9 380 (still on Radeon driver 19.9.2, as 19.12.1 caused Major problems (couldnt run Supremacy).
Did not try newer drivers than that since then.
RAM: 16 GB
Win 10 Pro 64bit 1903.18362.592
CPU Usage got better now...just around 6-7% in "idle" sitting on galaxy map.
GPU usage between 0-80% (for a second).
There is still "some" lagging in game - but got much better.
It seems that the User interface Aliasing setting impacts this a little.
The other two seemd to have no impact. At least on my rig.
I wonder whether it might have to do with Ryzen CPU being built of 2 Core complexes...
System:
CPU: Ryzen 3600X
GPU: Radeon R9 380 (still on Radeon driver 19.9.2, as 19.12.1 caused Major problems (couldnt run Supremacy).
Did not try newer drivers than that since then.
RAM: 16 GB
Win 10 Pro 64bit 1903.18362.592
You do not have the required permissions to view the files attached to this post.
-
- Admiral
- Posts: 3318
- Joined: Fri Apr 10, 2009 2:00 am
Re: CPU usage
From 50% to 7%, cool!
Thanks for all the info!
Thanks for all the info!
-
- Captain
- Posts: 660
- Joined: Wed Jun 21, 2017 6:07 am
Re: Supremacy new release
Hi Iceman,
I have downloaded Feb14. So far I can only say that my last save seems working. Anyway I have saved again under new version.
I have checked the CPU load - about 15-16% in idle mode (Galaxy map) + about 12% GPU usage.
I have downloaded Feb14. So far I can only say that my last save seems working. Anyway I have saved again under new version.
I have checked the CPU load - about 15-16% in idle mode (Galaxy map) + about 12% GPU usage.
-
- Admiral
- Posts: 3318
- Joined: Fri Apr 10, 2009 2:00 am
Re: Supremacy new release
IIRC I cleaned up some bonuses before releasing feb14, so there might be some weird bonuses in some buildings, like what happened some time ago.
I was waiting for feedback on CPU load, ended up releasing with the original refresh rate. Might change it back to one of the patches, if it makes enough of a difference.